Phrozen Sonic Saber - Blade Replacement Kit
Perfecting your prints with precision and ease with Phrozen Sonic Saber The Ultrasonic Cutter.
Contents:
- Instruction card
- Replacement blade x20
- Collet x2
- Setscrew x3
Specs
- Blade size: 18 x 4 x 0.38 mm
- Blade angle: 30°sharp angle
- Setscrew: M3X4
Resources
Instructions
-
STEP 1: Turn off the machine, then use Allen wrench to loosen the setscrew.
-
STEP 2: Pull out the blade (and the collet if it needs to be replaced).
-
STEP 3: Insert the new collet (if it needs to be replaced) and align the groove.
-
STEP 4: Insert the new blade and tighten the setscrew. (Check blade's direction.)
Precautions
- Turn off the power and unplug the cord before replacing the blade.
- Handle the product only with dry hands, and wear cut-resistant gloves.
- Do not point the Ultrasonic Knife at others.
- DO NOT replace the blade immediately after use, as high temperatures can cause burns.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Phrozen Sonic Saber - Blade Replacement Kit
Phrozen Sonic Saber - Blade Replacement Kit
Perfecting your prints with precision and ease with Phrozen Sonic Saber The Ultrasonic Cutter.
Contents:
- Instruction card
- Replacement blade x20
- Collet x2
- Setscrew x3
Specs
- Blade size: 18 x 4 x 0.38 mm
- Blade angle: 30°sharp angle
- Setscrew: M3X4
Resources
Instructions
-
STEP 1: Turn off the machine, then use Allen wrench to loosen the setscrew.
-
STEP 2: Pull out the blade (and the collet if it needs to be replaced).
-
STEP 3: Insert the new collet (if it needs to be replaced) and align the groove.
-
STEP 4: Insert the new blade and tighten the setscrew. (Check blade's direction.)
Precautions
- Turn off the power and unplug the cord before replacing the blade.
- Handle the product only with dry hands, and wear cut-resistant gloves.
- Do not point the Ultrasonic Knife at others.
- DO NOT replace the blade immediately after use, as high temperatures can cause burns.
Original: $20.00
-70%$20.00
$6.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Perfecting your prints with precision and ease with Phrozen Sonic Saber The Ultrasonic Cutter.
Contents:
- Instruction card
- Replacement blade x20
- Collet x2
- Setscrew x3
Specs
- Blade size: 18 x 4 x 0.38 mm
- Blade angle: 30°sharp angle
- Setscrew: M3X4
Resources
Instructions
-
STEP 1: Turn off the machine, then use Allen wrench to loosen the setscrew.
-
STEP 2: Pull out the blade (and the collet if it needs to be replaced).
-
STEP 3: Insert the new collet (if it needs to be replaced) and align the groove.
-
STEP 4: Insert the new blade and tighten the setscrew. (Check blade's direction.)
Precautions
- Turn off the power and unplug the cord before replacing the blade.
- Handle the product only with dry hands, and wear cut-resistant gloves.
- Do not point the Ultrasonic Knife at others.
- DO NOT replace the blade immediately after use, as high temperatures can cause burns.
